Reusable Polyacrylonitrile-Sulfur Extractor of Heavy Metal Ions from Wastewater

Mercury, lead, and cadmium are among the most toxic and carcinogenic heavy metal ions (HMIs), posing serious threats to the sustainability of aquatic ecosystems and public health. There is an urgent need to remove these ions from water by a cheap but green process. Traditional methods have insufficient removal efficiency and reusability. Structurally robust, large surface-area adsorbents functionalized with high-selectivity affinity to HMIs are attractive filter materials. Here, an adsorbent prepared by vulcanization of polyacrylonitrile (PAN), a nitrogen-rich polymer, is reported, giving rise to PAN-S nanoparticles with cyclic π-conjugated backbone and electronic conductivity. PAN-S can be coated on ultra-robust melamine (ML) foam by simple dipping and drying. In agreement with hard/soft acid/base theory, N- and S-containing soft Lewis bases have strong binding to Hg²⁺, Pb²⁺, Cu²⁺, and Cd²⁺, with extraordinary capture efficiency and performance stability. Furthermore, the used filters, when collected and electrochemically biased in a recycling bath, can release the HMIs into the bath and electrodeposit on the counter-electrode as metallic Hg⁰, Pb⁰, Cu⁰, and Cd⁰, and the PAN-S@ML filter can then be reused at least 6 times as new. The electronically conductive PAN-S@ML filter can be fabricated cheaply and holds promise for scale-up applications.     

基于NTP的网络时间服务器校准方法探讨

为了解决基于NTP的网络时间服务器校准问题,对其展开校准项目和校准方法的探讨,给出了NTP同步偏差、定时准确度和定时稳定度等校准项目并结合实验详细阐述了两种NTP同步偏差的校准方法,实验结果表明,采用直接测量法的NTP同步偏差为10.25μs,不确定度为62.08μs(k=2);采用比较法的NTP同步偏差为139.75μs,不确定度为6.36ms(k=2).     

Chicken nuggets-like core/shell nanosheet arrays as high performance flexible all-solid-state supercapacitor cathode and buckwheat shell as anode

The energy density of a flexible all-solid-state supercapacitor (ASC) requires new electrode material with special structure and morphology as a prerequisite for its secured improvement. In this paper, a new morphological exploration of chicken nuggets-like core/shell NiCo₂O₄/MnO₂ (NCM) nanosheet arrays on Ni foam was employed. The application of this special morphology aims to greatly improve the electrochemical performance of the cathode electrode. Additionally, Buckwheat Biochar (BBC) is utilized as the anode while the PVA/KOH thin film is prepared as the separator. The chicken nuggets-like core/shell NCM nanosheet arrays were obtained by a two-step hydrothermal method. A series of characterization methods were carried out to further support the core/shell's well-designed structure and precise composition. The tests exhibited excellent specific capacitance of 593.3 F g^?1 at 5 mA cm^?2 and outstanding cycling stability with a retention of 90% after 10000 cycles. Furthermore, the assembled NCM//BBC ASC device indicated a high specific capacitance (239 F g^?1 at the current density of 5 mA cm^?2), this is in due part of the unique architecture of NCM nanosheet arrays and interconnected special porous structure of the BBC and the thin film PVA/KOH. Hence, the assembled ASC device exhibited high energy density (an energy density of 58 Wh·kg^?1 at 3263 W kg^?1) and remarkable cycling stability.     

Simple and novel synthesis of zirconia whiskers from a phosphate flux

High quality zirconia whiskers have been successfully prepared by molten salt method, using zirconium oxychloride (ZrOCl₂·8H₂O) and sodium phosphate tribasic dodecahydrate (Na₃PO₄·12H₂O) as precursor and molten salt, respectively. The effects of types of molten salt and heat treatment temperature on the formation of zirconia whiskers were characterized by XRD, Raman, DTA-TG, FE-SEM, TEM, SAED and HR-TEM. When Na₃PO₄·12H₂O is utilized as molten salt and the heat treatment temperature is 900?°C, the as-prepared zirconia whiskers with length ranging from 4?µm to 8?µm show an average aspect ratio of 25. The obtained ZrO₂ whiskers with monoclinic structure are elongated along [010] direction and exhibit a smooth surface with no distinct defects. The XRD and Raman results reveal that the phase transformation from tetragonal zirconia to monoclinic zirconia occurs with the increased crystal size and the water quenching treatment can significantly reduce the content of sodium zirconium phosphate [Na_9–4×Zr_x(PO₄)₃] in the final product. The growth mechanism of zirconia whiskers is supposed to be a dissolution-precipitation process. Since the sodium zirconium phosphate [Na_9–4×Zr_x(PO₄)₃] effectively promotes the dissolution of zirconia in liquid molten salt, zirconia can grow into zirconia whiskers according to its anisotropy.     

Effects of high-intensity ultrasound treatment on physiochemical properties of caseins-cyanidin-3-galactoside conjugates

The application of protein-polyphenol complexes is increasing and broadening in recent years. Due to their unique properties, these complexes are attracting increased research interest. In this study, the cyanidin-3-galactoside was grafted to the caseins using free radicles induced by ultrasound. The formation of conjugation between caseins and cyanidin-3-galactoside was confirmed by the decrease in free amino groups and sulfhydryl content. Conjugation with cyanidin-3-galactoside resulted in aggregation of caseins, which also led to increase in particle size, relative fluorescence intensity and random coil. Conjugation also disrupted the hydrogen bonds and decreased the electrostatic repulsion and hydrophobic interactions between caseins. The caseins-cyanidin-3-galactoside conjugate had better emulsifying, gelation properties and lower thermal stability than that of caseins.     

The peptides in oat and malt extracts that are preferentially absorbed by Lactobacillus plantarum and stimulates its proliferation in milk

Lactobacillus plantarum proliferates inefficiently in milk, mainly because of its lack of cell envelope proteases and its inability to hydrolyse proteins in milk. Our previous study showed that this strain could grow well in milk with the addition of oat and malt extracts. To investigate the usage and preference for polypeptides and oligopeptides for this strain, sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), o-phthaldialdehyde (OPA), high-performance liquid chromatography (HPLC), plate counting and other methods were used in this study. The results showed that proteins in fermented milk cannot be absorbed and utilised by L. plantarum, whereas polypeptides and oligopeptides provide available nitrogen sources for their growth. Short-chain peptides were more conducive to absorption and utilisation than long-chain peptides. In particular, peptides with molecular weights in the range of 200–1400 Da in the oat extract and 100–700 Da in the malt extract were preferentially absorbed and utilised.     

Producing Fatty Acid Methyl Esters from Free Fatty Acids with Ionic Liquids as Catalyst

Three Brønsted acidic imidazole dicationic ionic liquids (ILs) with different length of alkyl chains, [C_n(Mim)₂][HSO₄]₂ (n = 3, 6, 12), were prepared and used as catalyst for the esterification reaction of free fatty acids and methanol. Taking oleic acid as model acid, the catalytic performances of the synthesized ILs for the esterification were evaluated. The main physicochemical properties of the ILs, thermal stability, acidity, solubility in common solvents, and causticity on Austenitic stainless steel 316, were examined. [C₃(Mim)₂][HSO₄]₂ demonstrated the highest catalytic activity and enabled to assess the preliminary optimum esterification condition of oleic acid and methanol. Under optimized reaction conditions, the yield of oleic acid methyl ester was up to 95 %. The ILs have great potential as catalysts for producing fatty acid methyl esters from long‐chain free fatty acids.     

Dual pH‐ and thermal‐responsive nanocomposite hydrogels for controllable delivery of hydrophobic drug baicalein

Hydrogels have been widely used as mild biomaterials due to their bio‐affinity, high drug loading capability and controllable release profiles. However, hydrogel‐based carriers are greatly limited for the delivery of hydrophobic payloads due to the lack of hydrophobic binding sites. Herein, nano‐liposome micelles were embedded in semi‐interpenetrating poly[(N‐isopropylacrylamide)‐co‐chitosan] (PNIPAAm‐co‐CS) and poly[(N‐isopropylacrylamide)‐co‐(sodium alginate)] (PNIPAAm‐co‐SA) hydrogels which were responsive to both temperature and pH, thereby establishing tunable nanocomposite hydrogel delivery systems. Nano‐micelles formed via the self‐assembly of phospholipid could serve as the link between hydrophobic drug and hydrophilic hydrogel due to their special amphiphilic structure. The results of transmission and scanning electron microscopies and infrared spectroscopy showed that the porous hydrogels were successfully fabricated and the liposomes encapsulated with baicalein could be well contained in the network. In addition, the experimental results of response release in vitro revealed that the smart hydrogels showed different degree of sensitiveness under different pH and temperature stimuli. The results of the study demonstrate that combining PNIPAAm‐co‐SA and PNIPAAm‐co‐CS hydrogels with liposomes encapsulated with hydrophobic drugs is a feasible method for hydrophobic drug delivery and have potential application prospects in the medical field. © 2018 Society of Chemical Industry     

Preparation of manganese monoxide@reduced graphene oxide nanocomposites with superior electrochemical performances for lithium-ion batteries

Manganese monoxide (MnO) nanowire@reduced graphene oxide (rGO) nanocomposites are synthesized using a simple hydrothermal method combined with a calcination process. The structural and morphological characterization of the composites indicates that the MnO nanowires homogeneously anchor on both sides of the cross-linked rGO. The nanocomposites exhibit a high surface area of 126.5?m² g^?1. When employed as an anode material for lithium-ion batteries, the nanocomposites exhibit a reversible capacity of 1195 mAh g^?1 at a current density of 0.1?A?g^?1, with a high charge-discharge efficiency of 99.2% after 150 cycles. The three-dimensional architecture of the present materials exhibits high porosity and electron conductivity, significantly shortening the diffusion path of lithium ions and accelerating their reaction with the electrolyte, which greatly improves the lithium-ion storage properties. These excellent electrochemical performances make the composite a promising electrode material for lithium-ion batteries.     

Processing Modflow在地下水位预测中的应用

数值模拟软件逐渐成为预测地下水演化更普遍的工具,并且广泛应用于地下水动态变化研究.以乌苏市平原区为例,结合区域水文地质条件及钻井资料,利用Processing Modflow建立三维水流数值模拟模型,并对该模型进行平面流场拟合,验证出模拟值基本符合2018年实测地下水位,通过模型模拟2018—2027年不同条件地下水位变化趋势,结果显示,2027年现状条件下比用水总量条件下浅埋深面积减少了550km2.